Skip to main content

Posts

Showing posts with the label finishing

Hofner Colorama II restoration project part 17 finishing the paint job

Back in this post (http://diystrat.blogspot.com/2011/11/hofner-colorama-ii-restoration-project_30.html), we applied some initial coats of paint (two complete rattle cans, in fact) to our vintage Hofner Colorama II and left it to dry for a few weeks. This is how it looked after that: The whole body was then wet sanded with 400 grit paper wrapped around a rubber sanding block. This left us with a clear view of any imperfections that were either small divots that were missed at the time of filling, or where the filler didn’t stay in place during pre-paint-application sanding. Rather than applying hundreds of coats of paint until these were filled in, they were spot-filled instead. To do this, we sprayed some of the red paint from the same rattle can into the rattle can lid, left it to thicken up for 10 minutes or so, and then applied it with a small paint brush (the paint brush can be cleaned afterwards with mineral spirits (turps) and live to see another day). The filled-in areas were th...

Hofner Colorama II restoration project part 13 finishing the neck

Our vintage Hofner Colorama II guitar neck was initially lacquered about two months ago. Since then, after a month, it was sanded back a little and a few more layers of lacquer were applied. There is now enough thickness to consider finishing this, but before doing so, we need to deal with a couple of pesky areas where the lacquer ran. This is what I’m talking about: There are several ways to tackle this, but I’m going to do it with a razor. Here you can see me (very carefully) scraping the surplus lacquer off, one thin layer at a time. The razor needs to be held extremely level here, otherwise one of the corners will dig into the finish where you don’t want it. You can add a little bit of tape to each end of the razor to minimise this risk, but I prefer to just be careful. Here’s how it looks after removing the unwanted material. Now we’re ready to give the whole neck a final sanding. I’m wet sanding this with 1200 grit sandpaper. You could get a little more aggressive with this, usin...