TREE

The Simplecortex is a microcontroller development board that is shield compatible with the Arduino. The Simplecortex has a fast microcontroller, the LPC1769 from NXP. This is a ARM Cortex M3 microcontroller with 512KB flash, 64KB RAM and it runs at 120Mhz. To make sure that the Simplecortex is easy to use we made tutorials for almost every peripheral on the chip and examples to get you started. There are tutorials for simple stuff like IO control up to more advanced tutorials for MicroSD cards. If you have ideas for a new tutorial or made a tutorial yourself, feel free to drop an email or post it in the forum. The Simplecortex also has an onboard debugger. It can also be used to program external devices like a self made PCB for your own project. No more microcontrollers with pre-programmed bootloader needed.        [ ]

Procyon is a general purpose development board with special features for Ethernet, USB, and audio applications. It is based on Luminary Micro/Texas Instruments LM3S9x9x series of parts. The initial MCU is LM3S9B90. The board contains the following features: 80 MHz, 100 Pin Cortex M3 Processor 16 MB SDRAM accessed on a 50 MHz EPI bus USB Host/Device/OTG port microSD card slot (Attached to SSI1/SPI1) 10/100 Ethernet I2S header for DAC output interface Up to 24 GPIOs available 3 UART, 2 I2C, 1 CAN, 2 SPI/SSI (one shared with microSD card) 10-bit ADCs General purpose timers: four 32-bit or eight 16-bit FTDI/Basic UART debug/program interface, on 16 pin GPIO/configuration header Three 10 pin headers for daughter boards 20 Pin JTAG Header User LED and User switch [ ]