TREE

i used ss display and manual i/p board to interface it with 8051 Generic board, of course you can interface it with any other microcontroller.  ICs required for this board are 74hc573 latch, 74hc238 decoder and 74ls48 BCD2dec converter . For their proper working operation refer to their datasheets. 74hc573 is used to store data so that the previous content on SS is not vanish when we disable LE pin. T0 select the proper latch 74hc238, 3x8 decoder is used. And to convert BCD into decimal, 74ls48 converter is used. Note that latches U1 to U4 are connected with C.C SS, so the output of 74ls48 will only go to these latches. Whereas latches U6 and U8 are connected to DP oF SS and LEDs respectfully. You can emit these latches i used them to distinguish between various mode i.e, digital clock, stop watch, counter and manual input etc. For manual input DSW1 is used and J2 is the 8-way connector i used to connect it with 8051 Generic board, same for J1 connector. J3 and three switches are u...

So…which domain name extension should you use? .COM, .NET, .ORG, .INFO or .US? The answer depends on your business model. If you want to learn more about these extensions (and their ability to rank on Search Engines), read on. .COM Domains, History and Ranking You should always pick the .COM before any other extension. This is because .coms have become the industry standard for domain names. Whenever you hear someone start saying www…you naturally expect a .COM at the end. It also ranks best because, in the beginning (1985), .COM was created to represent commercial usage. Since businesses naturally embraced the domain extension, it’s presence and familiarity took off. This large presence of .com domains helped establish its reputation forever on the Internet. .COM domains rank easily and quickly. I always pick .COM domains whenever possible. I even prefer a long .COM to a short .NET or .ORG. More examples are given near the end. .NET Domains, History and Ranking This domain is .com’s u...

Here is a very simple and easy to use audio amplifier using I.C BEL (Bharat electronics limited)1895 , a very common IC. This circuit can run on 3V to 6v , making it easy to use in pocket amplifier . Cost is under 25/- Parts list: BEL1895 I.C (DIP8), C1 = 470uF/10V, C2 = 1000uF/16V, C3 = 220uF/10V, C4 = 100uF/10V, C5 = 4.7uF/10V, C6 = 47pF, C7,C8 = 1uF, R1 = 47Ohm, R2 = 470Ohm, R3 = 100K, R4 = 1Ohm, R5 = 10K V/C, speaker, etc… Total cost is around 20-30 rupeess(INR) or 0.6USD.