Skip to main content

Posts

Showing posts with the label photo

Light sensor using photo diode

The light sensor circuit shows the application of  photo diode to detect the presence of light. This light sensor can be used as an intermediate circuit in various applications to detect the presence or absence of light. The sensitivity of the sensor can be adjusted using the preset. A photo diode , used as a photo detector, generates current in the circuit when light incidents on it. This circuit uses the photo diode in reverse bias mode with resistor R1(10k). This resistor does not allow too much current to flow through the photo diode in case a large amount of light falls on the detector. Initially when no light falls on the photo diode, it results in high potential at the inverting input of a comparator (pin6) of LM339. When light falls on the photo diode, it allows current to flow through the diode, and thus drops the voltage across it. The non-inverting input (pin7) is connected to a variable resistor VR2 (preset) which is used to set the reference voltage of the compar...

LED Photo sensor

LED Photo sensor Circuit Diagram. It is not always necessary to use special photoresistors or phototransistors to make light-sensitive switches. Although it is not well known, normal visible-light and infrared LEDs will also work. A voltage that depends on the intensity of the natural or artificial illumination falling on the LED can be taken from the anode of the LED. This behaviour can be easily verified by connecting a DVM or oscilloscope directly to the two leads of the LED. LED Photo sensor Circuit Diagram: LED Photosensor Circuit Diagram Since the load on the photoelectric potential should be kept as small as possible, a JFET is used here as a buffer. The type used is not critical; similar transistors should work equally well. The buffered voltage is fed to the inverting input of comparator IC1. The threshold voltage can be adjusted to meet the desires of the user by means of the potentiometer. A pull-up resistor is connected to the com-parator output, since the LM393 has an open...