TPA3122D2 Class D Audio Amplifier

TPA3122D2 IC is used as a class D audio amplifier and can deliver up to 15W of power at 10% distortions. The real advantage of using a class D amp, especially TPA3122 is the fact that this IC doesn’t need a heatsink because it has a high efficiency. Another great thing about it is that you can buy a $20 built-it-yourself kit or even cheaper from ebay but you need to be careful not to buy a fake one.

I discovered this IC while searching for an audio amplifier circuit that I need for the 2 x 10W/4Ω speakers received from my brother-in-law. I think that TPA3122 can provide enough power for what I need even though it can output only 8W with 1% distortions on a 4Ω speaker (something that some of you might find too low). The main reason I would choose this instead of a class A or B IC is the fact it doesn’t need a heatsink, so the whole amplifier will be lighter in weight and cheaper.

Comments

Build a Key Operated Gate Locking System Circuit

This simple key-operated gate locking system allows only those persons who know the preset code to open the gate. The code is to be entered from the keypad within the preset time to operate the motor fitted in the gate. If anyone trying to open the gate presses a wrong key in the keypad, the system is disabled and, at the same time, sounds an alarm to alert you of an unauthorized entry. Figs 1 and 2 show the block and circuit diagrams of the key-operated code locking system, respectively. Connect points A, B, C, D, E, F and ground of the circuit to the respective points of the keypad. Keys S7, S16, S14 and S3 are used here for code entry, and the remaining keys are used for disabling the system. It is very important to press the keys in that order to form the code. To start the motor of the gate, press switches S7, S16, S14 and S3 sequentially. If the keys are pressed in a different order from the preset order, the system will lock automatically and the motor will not start. Fig. 1: Bl...

A basic Arduino Solar PV Monitor

I have just recently had solar pv installed, mainly to future proof my energy costs, I do not expect it to be like drilling for oil in my back garden, however the return looks to be encouraging. The install gives you another single unit meter, from this you will see the total amount the panels produce, but that is about it. I wanted to know how much the production was as it was happening, I discovered the light blinks on the front of the meter will flash 1000 times for each kWh of electricity which passes through. The rate of the flashing of the LED tells you how much power is currently passing through the meter. [ ]

Apple releases TV spot for new iPods

Apple has just released a fun commercial to showcase its new line of iPod players and the various colours they come in. The TV spot titled ‘Bounce’, has a bunch of colourful iPod touch, iPod nano and iPod shuffles er…bouncing to music. With all that colour and dancing and bouncing, you may forget that Apple’s latest gen line of iPods has some other awesome features. For instance, the fifth gen iPod touch comes with Siri, 4-inch retina display and an A5 chipset. Maybe the next ad will showcase some of these features with less bouncing.link

TREE

Search This Blog